3D Printing is a gold mine!

Posted By sculpteo on May 5, 2011 | 1 comment

With these simple tips for painting printed parts and give them a metallic look, you can make a beautiful 3D Printed Gold bullion

– Lightly sand your part using 220 grit sandpaper
– Use nylon brush for hard to reach areas
– Air-clean your part
– Shake primer can
– Apply one or more thin coats as needed
– Lightly sand primed part using 220 grit sandpaper
– Shake paint
– Apply one or more thin coats as needed

You have your 3D Printed gold bullion