Posts by Antu


As you may have read on of our post about 3D printing uses, ever since the first 3D printing technologies started to emerge, there has been one true undisputed application for it: Prototyping. 3D printing back then and especially today with its ever increasing speed and versatility has turned into the number one tool when it comes to quickly materializing an object or idea. Today in a matter of days or sometimes even hours we can...

Read More

Unless you are currently working on the manufacturing sector, it may not come as your first thought the fact that 3D printing technologies are not only changing the rules for direct production i.e. 3D print your final object; but also as a complementary technology to make more traditional manufacturing methods better than ever. However, 3D printing advanced tools and parts is already increasing production rates, improving efficacy and...

Read More

It’s been a just few weeks since we brought you a short comparison between two of the most used 3D printing technologies, Selective Laser Sintering or SLS and Stereolithography or SLA. This time we are going to address some doubts regarding Polyjet 3D printing and how it compares to SLS just as we did earlier.  Here is our SLS vs Polyjet comparison!  As you may remember from our last comparison, SLA printers are -by design- incapable...

Read More

At Sculpteo we receive the question what’s the difference between SLA technology and SLS technology a lot, and today we’d like to share with you the similarities and differences of these 3D Printing technologies and materials. SLS, SLA, FDM, FFF, ABS, PA, PLA…  Today more than ever, keeping up with all those acronyms representing all the different technologies, materials or processes, can be a bit of a challenge....

Read More

Another week has arrived, and with it another episode of our How 3D Printing will revolutionize your Industry series. This week’s industry and its relationship with 3D printing affects most of us in a very direct way, even though it may be almost invisible to us. We are talking about hi-tech electronic devices, or more specifically, the consumer electronics industry. We all get super excited when a new super fancy device is released,...

Read More

Back with a new delivery from our How 3D Printing will revolutionize your industry series, this week we are going to show you how 3D printing is changing several industries that develop mechanical systems for a wide range of applications, from hi-tech bikes to spacecrafts.   It has been a relatively long time by now since computers took over a large portion of the work necessary to create sophisticated mechanical systems, from...

Read More

In this first episode of our How 3D Printing will Revolutionize your Industry series we will tell you what has been going on in recent years in the Architecture and Construction Industry in connection with 3D printing. Architecture studios inside 3D printers?! If you are reading this there is a good chance that you are already one of us, a 3D printing fan, or at least you are on your way to becoming one. And there is a good reason for...

Read More

By now it’s really not difficult to see the immense potential that 3D printing offer to us and these days more and more people are eager to jump on board and benefit with this amazing technology. As often happens with new technologies, it requires some learning on the user’s side to take full advantage of all these new tools available. In the case of 3D printing the first challenge commonly comes when we need to create a digital...

Read More

Batteries. We use them everywhere and all the time to the point of having become seriously dependent on them. That is exactly why it may come as a surprise how in this current era of constant innovation meant to make our lives easier there is that one single component embedded on most of ours daily used gadgets that has barely changed in the last 40 years since its conception. Clearly, we are talking about batteries and the good news...

Read More

It’s been over an year since the last study about 3D printing costs for personal and professional use so we have decided that a new, updated and improved version was necessary. First of all we started with the basics; as 3D printing technologies evolve more and more printers become available and/or affordable and at the same time, some manufacturers seize the opportunity of an upgrade to increase their prices (or adopt...

Read More
Page 1 of 11

Keep up to date with Sculpteo by signing up to our newsletter!

 

Sign Up now!

CLOSE