Technische Spezifikationen und Designrichtlinien

grey bg group

Nachfolgend finden Sie für jedes unserer 3D-Druckmaterialien Informationen zu den technischen Eigenschaften, der Lebensmittelbewertung, der Werkszertifizierung und den regulatorischen Informationen.

Polymere
Kunstharz
Metalle

Vergleich der mechanischen Eigenschaften von Hochleistungsmaterialien

Dieses Radar-Diagramm vergleicht die wichtigsten mechanischen Eigenschaften unserer Hochleistungsmaterialien, darunter MJF PA12, MJF PA12 S, SLS PA11, SLS PA12 und SLS PA11 CF. Es zeigt die Unterschiede im Elastizitätsmodul, in der Zugfestigkeit und in der Bruchdehnung auf und bietet einen klaren Überblick über das Leistungsprofil jedes Materials. Dieser visuelle Vergleich hilft dabei, das am besten geeignete Material für spezifische funktionale Anforderungen zu bestimmen, je nachdem, ob Steifigkeit, Festigkeit oder Flexibilität im Vordergrund steht.

Polymere

AVAILABLE AT LAYER THICKNESS MINIMUM WALLTHICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLEDETAIL ENGRAVING EMBOSSING
SLS Technology PA12 100 – 120 µm Flexible: 0.8mm Rigid: 2mm X/Y : ± 0.3% (minimum of ± 0.3 mm) Z : ± 0.5% (minimum of ± 0.3 mm) 675 x 366 x 545 mm 0.3mm 0.5mm 0.4mm
PA12 Grey GF 100 µm Flexible: 1.5mm Rigid: 2mm ± 0.45% (min of ±0.45mm) 300 x 300 x 590 mm 1mm – –
PA2210 FR 100 – 120 µm Flexible: 0.8mm Rigid: 2mm ± 0.3% (min of ± 0.3mm) 310 x 310 x 601mm 0.3mm 0.5mm 0.4mm
Ultrasint® TPU 88A 100 µm 0.8mm ± 0.3% (min of ± 0.3mm) 196 x 176 x 315 mm – 0.7mm 0.7mm
Ultrasint® PA11 100 µm 0.8mm XY: ± 0.3% (min: 0.4mm) Z:±0.6% (min:0.6mm) 300 x 300 x 590 mm – 0.5mm 0.5mm
Ultrasint® PA11 ESD 100 µm 0.7mm ± 0.4% (min of ± 0.4mm) Raw : 150 x 200 x 250 mm – 0.5mm 0.5mm
Ultrasint® PA11 CF 100 µm 1mm ± 0.3% (min of ± 0.3mm) Raw : 320 x 280 x 330 mm – 0.5mm 0.5mm
PA12 (blue) 100 – 120µm 1mm (1,5mm with chemical smoothing) ± 0.45% (minimum of ± 0.45 mm) 310 x 310 x 590 mm 0.3 mm 0.5 mm 0.5 mm
PA12 GF – – NFT 58000 Standard Class (Category 3) 500 x 500 x 400 mm – – –

AVAILABLE AT LAYER THICKNESS MINIMUM WALLTHICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLEDETAIL ENGRAVING EMBOSSING
MJF Technology PA12 80 µm Flexible: 0.8mm Rigid: 2mm XY: ±0.3% (min ±0.3 mm) Z:±0.5% (min±0.5mm) 370 x 274 x 380 mm 0.2mm 0.3mm 0.4mm
PA12 S 90 µm Flexible : 0.8mm Rigid : 2mm X/Y : ±0.3% (min 0,3mm) Z : ±0.5% (min 0,5mm) 370 x 274 x 380 mm 0.2mm 0.3mm 0.4mm
Polypropylene 120 µm 0.8mm XY: ±0.6% (min of ±0,7mm) Z: ±1%(min of±1.1mm) 360 x 264 x 370 mm – 0.5mm 0.5mm
Ultrasint® TPU01 100 µm 0.8mm ± 0,3% (min of ± 0.3mm) 274 × 370 × 380 mm – 0.7mm 0.7mm
PA11 100 µm 1mm XY: ±0.3 % (min:0.3mm) Z:±0.7% (min:0.6mm) Raw: 274 x 370 x 380 mm – 0.5mm 0.5mm
PA12 FR – – NFT 58000 Standard Class (Category 3) 380 x 284 x 380 mm – – –
PA12 GB – – NFT 58000 Standard Class (Category 3) 380 x 284 x 380 mm – – –

AVAILABLE AT LAYER THICKNESS MINIMUM WALLTHICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLEDETAIL ENGRAVING EMBOSSING
FDM Technology rPET 250 µm 1.2mm :± 0,3% (min ± 0.3mm) 400 x 400 x 400 mm – 0.8mm 3mm
PETG ESD 200 µm 1.2 mm +/- 0,3 % (min 0.3mm) 340 × 320 × 340 mm – 0.8mm 2mm
PLA 0,1–0,2 mm 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
ABS 0,1–0,2 mm 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
ABS ESD – 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
ABS MDT – 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
ABS Ignifugé – 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
PP – 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
PA HT + 15% Carbone 0,1–0,2 mm 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
PC-PBT 0,1–0,2 mm 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
PET HDGlass Alimentaire 0,1–0,2 mm 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
TPU 85 Shore – 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
TPU 95 Shore – 1 mm NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –

AVAILABLE AT YOUNG’S MODULUS TENSILE STRENGTH ELONGATION AT BREAK MELTING TEMPERATURE SHORE HARDNESS CHARPY IMPACT TEST (NOTCHED) CHARPY IMPACT TEST (UNNOTCHED) HDT B (0.45 MPa, DRY) CERTIFICATIONS
SLS Technology PA12 1700 ± 150 MPa 45 ± 3 MPa (X-Y) 11% – (Z) 3-9% min. 172°C, max. 180°C 75 ± 2 D 4,8 ± 0,3 kJ/m² – 154°C Food assessment REACH
PA12 Grey GF 3200 MPa 51 MPa 9% 185 – 188 °C 80 D – – – –
PA2210 FR 2500 (dry) MPa 2400 (cond) MPa 46 (dry) MPa 43 (cond) MPa 4% (dry) 7% (cond) 185°C – – – – Blue card UL-94V-0
Ultrasint® TPU 88A 75 MPa 8 MPa X: 270% Z: 130% 120 – 150 °C 88 – 90 A No break – – Biocompatibility certificate upon request
PA11 XY: 1750 MPa Z: 1800 MPa(dry) XY: 52 MPa Z: 54 MPa(dry) XY: 28% Z: 24%(dry, 23°C) 203°C – XY: 5.1 MPa Z: 3.9 MPa(dry) XY: 184 MPa Z: 85 MPa(dry) 176°C Food contact Biocompatibility
Ultrasint® PA11 ESD XY: 3150 MPa Z: 2150 MPa(dry) XY: 65 MPa Z: 55 MPa(dry) XY: 20% Z: 23%(dry, 23°C) 204°C – XY: 6.6 MPa Z: 4.7 MPa(dry) XY: 80 MPa Z: 90 MPa(dry) 186°C –
Ultrasint® PA11 CF XY: 5900 MPa Z: 2500 MPa(dry) XY: 82 MPa Z: 55 MPa(dry) XY: 7% Z: 11%(dry) 202°C – XY: 6.4 MPa Z: 4.7 MPa(dry) XY: 54 MPa Z: 33 MPa(dry) 189°C –
PA12 (blue) – XY / Z 46 / 40 MPa XY / Z 30 / 3,5 % 100°C for 15 minutes or 70°C for 2 hours – – – – Declaration of conformity available upon request
PA12 GF 4068 MPa 26 MPa 1,4 % – 77 D 41 J/m 123 J/m 179°C Safety Data Sheet (FR)

AVAILABLE AT YOUNG’S MODULUS TENSILE STRENGTH ELONGATION AT BREAK MELTING TEMPERATURE SHORE HARDNESS CHARPY IMPACT TEST (NOTCHED) CHARPY IMPACT TEST (UNNOTCHED) HDT B (0.45 MPa, DRY) CERTIFICATIONS
MJF Technology PA12 XY: 1700 MPa Z: 1900 MPa 50 MPa XY: 17% Z: 9% – – – – – Biocompatibility PAHs certificate RoHS/REACH UL94 and UL746A
PA12 S 1700 MPa 43-45 MPa 12% – – – – – –
Polypropylene 1600 MPa 29 MPa X/Y: 20% Z: 14% – – – – 100°C –
Ultrasint® TPU01 85 MPa XY: 9 MPa Z: 7 MPa XY: 280% Z: 150% 120-150°C 88 – 90 A No break – – Biocompatibility
PA11 XY: 1700 MPa Z: 1800 MPa 54 MPa XY: 40% Z: 25% – – – – – Biocompatibility
PA12 FR XY: 2580 MPa Z: 2540 MPa 46 MPa XY: 4.7% Z: 4% – 2.7–2.8 kJ/m² (Izod) – – 172°C Safety Data Sheet (FR)
PA12 GB XY: 2800 MPa Z: 2900 MPa 30 MPa XY: 6.5% Z: 5.5% 186°C 2.7 kJ/m² (Izod) – – 173°C Safety Data Sheet (FR)

AVAILABLE AT YOUNG’S MODULUS TENSILE STRENGTH ELONGATION AT BREAK MELTING TEMPERATURE SHORE HARDNESS CHARPY IMPACT TEST (NOTCHED) CHARPY IMPACT TEST (UNNOTCHED) HDT B (0.45 MPa, DRY) CERTIFICATIONS
FDM Technology rPET XY: 1640 MPa Z: 1334 MPa XY: 38.6 MPa Z: 14.7 MPa XY: 4.3% Z: 1.2% 220°C – XY: 4 kJ/m² Xz: 2 kJ/m² XY: 55.7 kJ/m² Xz: 33.7 kJ/m² 71°C Recycled Content Declaration
PETG ESD X-Y : 1983 ± 66 MPa Z : 1626 ± 34 MPa X-Y : 36.1 ± 0.7 MPa Z : 20.7 ± 0.6 MPa X-Y : 7.3 ± 0.5 % Z: 1.8 ± 0.1 % 280°C – 5.7 ± 0.6 kJ/m2 – 72 °C – 76 °C –
PLA 2636±330 MPa 46.6±0.9 MPa 1.90±0.21 % – – 2.68 ± 0.16 kJ/m2 – – Safety Data Sheet (FR)
ABS 2174 ± 285 MPa 33.3 ± 0.8 MPa 2.7 ± 0.4 % – – 12.6 ± 1.1 kJ/m2 – – Safety Data Sheet (FR)
ABS ESD – – – – – – – – –
ABS MDT 1800 MPa 20 MPa 8.5 % – – 8.5 kJ/m² – – Safety Data Sheet
ABS Ignifugé 2400 MPa 65.1 MPa 62 % – – 12.5 kJ/m² (Izod) – – Safety Data Sheet
PP 470 MPa 11.9 MPa >200 % 141°C – – 61.0 kJ/m² – Safety Data Sheet
PA HT + 15% Carbone 8386 MPa 103.2 MPa 1.8 % 234°C – 4.8 kJ/m² 20.6 kJ/m² 145°C Safety Data Sheet
PC-PBT 1986 ± 85 MPa 41.8 ± 0.9 MPa 4.6 ± 0.7 % 223°C – 21.4 kJ/m² – – Safety Data Sheet
PET HDGlass Alimentaire – – – – – – – – –
TPU 85 Shore 54 MPa 34 MPa 600% – Shore A 90 / Shore D 37 No interruption No interruption – Safety Data Sheet
TPU 95 Shore – 23.11 ± 0.63 MPa 462.3 ± 21.1 % – Shore A 95 – – – Safety Data Sheet

Kunstharz

AVAILABLE AT LAYER THICKNESS MINIMUM WALLTHICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLEDETAIL ENGRAVING EMBOSSING
DLS Technology Rigid Polyurethane 100 µm Unsupported : 2.5mm Supported : 1mm XY: ± 0.1mm Z: ± 0.4mm 180 x 110 x 290 (z) mm 0.5mm 0.3mm 0.3mm
Elastomeric Polyurethane 100 µm Unsupported : 2.5mm Supported : 1mm – 180 x 110 x 100 mm 0.6mm 0.3mm 0.3mm

AVAILABLE AT LAYER THICKNESS MINIMUM WALLTHICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLEDETAIL ENGRAVING EMBOSSING
SLA Technology Transparent Resin 100 µm 0.8mm ±0.2% (with a lower limit of ±0.2 mm) 200 x 125 x 210 mm – 0.3 mm 0.3 mm
Prototyping Resin 100 µm 0.8mm ±0.2% (with a lower limit of ±0.2 mm) 144 x 144 x 174 mm – 0.5mm 0.5mm
Type PA 100 µm 0,7 mm NFT 58000 Standard Class (Category 3) 650 x 750 x 550 mm – –
Type PP 100 µm – NFT 58000 Standard Class (Category 3) 650 x 750 x 550 mm – – –
Type ABS 100 µm – NFT 58000 Standard Class (Category 3) 650 x 750 x 550 mm – – –
Type PC 100 µm – NFT 58000 Standard Class (Category 3) 650 x 750 x 550 mm – – –
Tough 50 µm – NFT 58000 Standard Class (Category 3) 350 x 190 x 350 mm – – –
High temp 50 µm – NFT 58000 Standard Class (Category 3) 350 x 190 x 350 mm – – –
FLEX 80SH 100 µm – NFT 58000 Standard Class (Category 3) 350 x 190 x 350 mm – – –

AVAILABLE AT LAYER THICKNESS MINIMUM WALLTHICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLEDETAIL ENGRAVING EMBOSSING
Polyjet Technology VeroWhite 28 µm 2mm – 203 x 254 x 251 mm 0.2mm 0.5mm 0.5mm
VeroClear 28 µm 2mm – 203 x 254 x 251 mm 0.2mm 0.5mm 0.5mm
SEBS like – – NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –
ABS like – – NFT 58000 Standard Class (Category 3) 256 x 256 x 256 mm – – –

AVAILABLE AT LAYER THICKNESS MINIMUM WALLTHICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLEDETAIL ENGRAVING EMBOSSING
DLP / LCD Technology Ultracur3D® EPD 1086 100 µm 0.6mm ± 100µm 510 x 280 x 350 mm (X – Y – Z) – 0.3mm 0.3mm
Ultracur3D® RG3280 100 µm 0.6mm ± 100µm 120 x 120 x 120 mm – 0.3mm 0.3mm
Pro Black 10 50 µm – NFT 58000 Standard Class (Category 3)) 123.5 x 69.5 x 345 mm – – –
Rubber 65 A 50 µm – NFT 58000 Standard Class (Category 3) 122.8 x 69.1 x 347.7 mm – – –
Rigid Gray 50 µm – NFT 58000 Standard Class (Category 3) 124.7 x 70.1 x 345.3 mm – – –

AVAILABLE AT LAYER THICKNESS MINIMUM WALLTHICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLEDETAIL ENGRAVING EMBOSSING
Vacuum Casting PX 205 – – NFT 58000 Standard Class (Category 3) Valid upon request – – –
PX 223 HT – – NFT 58000 Standard Class (Category 3) Valid upon request – – –
PX 226 – – NFT 58000 Standard Class (Category 3) Valid upon request – – –
PX 212 L – – NFT 58000 Standard Class (Category 3) Valid upon request – – –
PX 245L – – NFT 58000 Standard Class (Category 3) Valid upon request – – –
PX 280 – – NFT 58000 Standard Class (Category 3) Valid upon request – – –
PX 331 – – NFT 58000 Standard Class (Category 3) Valid upon request – – –
PX 523 – – NFT 58000 Standard Class (Category 3) Valid upon request – – –
UPX8400 – – NFT 58000 Standard Class (Category 3) Valid upon request – – –
PX 243HT – – NFT 58000 Standard Class (Category 3) Valid upon request – – –

AVAILABLE AT TENSILE MODULUS TENSILE STRENGTH ELONGATION AT BREAK HARDNESS SHORE IMPACT STRENGTH(IZOD NOTCHED) GLASS TRANSITIONTEMPERATURE HDT B (0,45 MPa, DRY) DENSITY FLEXURAL MODULUS FLEXURAL STRENGTH
DLS Technology Rigid Polyurethane 1700 – 2200 MPa 42 – 47 MPa 90 – 120 % – 21 – 23 J/m 80°C 70°C 1.01 – 1.02 g/mL (Liquid) 1500 – 2200 MPa 55 – 71 MPa
Elastomeric Polyurethane 8 ± 1 MPa 15 MPa 300% 71 (Shore A) – – 10°C – 1.03 g/cm³ – –

AVAILABLE AT TENSILE MODULUS TENSILE STRENGTH ELONGATION AT BREAK HARDNESS SHORE IMPACT STRENGTH(IZOD NOTCHED) GLASS TRANSITIONTEMPERATURE HDT B (0,45 MPa, DRY) DENSITY FLEXURAL MODULUS FLEXURAL STRENGTH
SLA Technology Transparent Resin 2575 MPa 51 MPa 10% – 29 J/m – 56 °C – 2450 MPa 92 MPa
Prototyping Resin 1.6 GPa (Green) 2.8 GPa (postcured) 38 MPa (Green) 65 MPa (postcured) 12% (Green) 6.2% (post-cured) – 16 J/m (Green) 25 J/m (postcured) – 49.7°C (Green) 73.1°C (postcured) – 1.25 GPa (Green) 2.2 GPa (postcured) –
Type PA 1790–1980 MPa 38–44 MPa 14–22% – 35–52 J/m – 62°C 1.19g/cm³ 1520–2070 MPa 52–71 MPa
Type PP 1590–1660 38 MPa 13–20% Shore D 80 19–24 J/m 60°C 58–63°C 1.19g/cm³ 1380–1660 MPa 55–58 MPa
Type ABS 3200 63–68 MPa 5–8% Shore D 85 12–22 J/m 56°C 55–58°C 1.19g/cm³ 2690–3240 MPa 88–110 MPa
Type PC 2270–2640 MPa 46–53 MPa 3–15% Shore D 80–85 40–58 J/m 62–70°C 51°C 1.17g/cm³ 1980–2310 MPa 72–84 MPa
Tough 1460 MPa 34 MPa 155% Shore D 76 42 J/m 109.6°C 66°C 1.12g/cm³ 1370 MPa 41 MPa
High temp 2800 MPa 58 MPa 3.3% – 18 J/m – 120°C – 2600 MPa 95 MPa
FLEX 80SH – 8.9 MPa 120% Shore A 80 – 27°C – – – –

AVAILABLE AT TENSILE MODULUS TENSILE STRENGTH ELONGATION AT BREAK HARDNESS SHORE IMPACT STRENGTH(IZOD NOTCHED) GLASS TRANSITIONTEMPERATURE HDT B (0,45 MPa, DRY) DENSITY FLEXURAL MODULUS FLEXURAL STRENGTH
Polyjet Technology VeroWhite 2000 – 3000 MPa 50 – 65 MPa 10 – 25% 83 – 86 (Shore D) 20- 30 J/m 52 -54 °C 45 – 50 °C 1.17 – 1.18 g/cm³ (Polymerisé) 2200 – 3200 MPa 75-110 MPa
VeroClear 2000 – 3000 MPa 50 – 65 MPa 10 – 25% 83 – 86 (Shore D) 20- 30 J/m 52 – 54 °C 45 – 50 °C 1.18 – 1.19 g/cm³ (Polymerisé) 2200 – 3200 MPa 75-110 MPa
SEBS like 1.3–1.8 MPa 1.3–1.8 MPa 110–130% Shore A 27 – – – – – –
ABS like 1700–2300 MPa 40–60 MPa 15–25% Shore D 75 25–35 J/m – 25–35°C – 1500–2500 MPa 55–75 MPa

AVAILABLE AT TENSILE MODULUS TENSILE STRENGTH ELONGATION AT BREAK HARDNESS SHORE IMPACT STRENGTH(IZOD NOTCHED) GLASS TRANSITIONTEMPERATURE HDT B (0,45 MPa, DRY) DENSITY FLEXURAL MODULUS FLEXURAL STRENGTH
DLP / LCD Technology Ultracur3D® EPD 1086 1810 MPa 42 MPa 26% 81 (Shore D) 28 J/m (23° Machined) – 53°C 1.18 g/cm³ 1620 MPa 67 MPa
Ultracur3D® RG3280 10000 MPa 76 MPa 0.7 – 1% 96 (Shore D) 24 J/m – >280°C 1.73 g/cm³ 8780 MPa 73 MPa
Pro Black 10 2320 MPa 63 MPa 12% Shore D 79 24 J/m 62°C 70°C 1.16g/cm³ 2290 MPa 92 MPa
Rubber 65 A 23 MPa 5 MPa 126% Shore A 65 – -10°C – 1.12g/cm³ – –
Rigid Gray – – 30% – – – 72°C – 2200 MPa –

AVAILABLE AT TENSILE MODULUS TENSILE STRENGTH ELONGATION AT BREAK HARDNESS SHORE IMPACT STRENGTH(IZOD NOTCHED) GLASS TRANSITIONTEMPERATURE HDT B (0,45 MPa, DRY) DENSITY FLEXURAL MODULUS FLEXURAL STRENGTH
Vacuum Casting PX 205 – – – Shore D 70 – 100°C 55°C 1.08 g/cm³ 500 MPa –
PX 223 HT – – – Shore D 80 – 120°C 120°C 1,14 g/cm³ 2300 MPa –
PX 226 – 70 MPa 15% Shore D 82 Charpy (sans entaille): 70 kJ/m² 105°C 92°C 1.20 g/cm³ 2500 MPa 105 MPa
PX 212 L – 40 MPa 10% Shore D 76 Charpy: >50 kJ/m² 100°C 75°C 1,15 g/cm³ 1200 MPa 55 MPa
PX 245L – 85 MPa 3% Shore D 85 Charpy: 30 kJ/m² 95°C 92°C 1.22 g/cm³ 4500 MPa 150 MPa
PX 280 – – – Shore D 85 – – 80°C 1,19 g/cm³ 2800 MPa –
PX 331 – – – Shore D 87 – 100°C 90°C 1,35 g/cm³ 3700 MPa –
UPX8400 – 17 MPa 430% Shore A 95 – – 70°C 1.10 g/cm³ – –
PX 243HT 1800 MPa 61 MPa 13% Shore D 80 Charpy (sans entaille): 41 kJ/m² 220°C 190 – 195°C 1.19 g/cm³ 1850 MPa 80 MPa

Metalle

AVAILABLE AT LAYER THICKNESS MINIMUM WALL THICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLE DETAIL ENGRAVING EMBOSSING
DMLS / SLM Aluminum AISi10Mg0,6 150 µm 1mm XY: ± 0.1mm Z: ± 0.4mm MAX SIZE 220 x 220 x 250 MIN SIZE – 1mm 0.5mm 0.5mm
Titanium 6AI-4V 60 µm 1mm – MAX SIZE 220 x 220 x 250 MIN SIZE – 1mm 0.5mm 0.5mm
Stainless Steel 316L 40 µm 1mm ± 100µm MAX SIZE 220 x 220 x 250 MIN SIZE – 1mm 0.5mm 0.5mm

AVAILABLE AT LAYER THICKNESS MINIMUM WALL THICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLE DETAIL ENGRAVING EMBOSSING
Wax Casting Bronze 25 µm 0.8mm ± 100µm MAX SIZE 125 x 125 x 40 MIN SIZE – 0.4mm 0.5mm 0.4mm
Brass 25 µm 0.8mm ± 200µm MAX SIZE 125 x 125 x 40 mm MIN SIZE 0.6 x 2.4 x 2.4 mm 0.4mm 0.4mm 0.5mm
Sterling Silver 25 µm 0.8mm ± 100µm MAX SIZE 125 x 125 x 40 mm MIN SIZE 2.4 x 2.4 x 0.8 mm 0.4mm 0.4mm 0.5mm

AVAILABLE AT LAYER THICKNESS MINIMUM WALL THICKNESS ACCURACY MAX SIZE (mm) MINIMUM VISIBLE DETAIL ENGRAVING EMBOSSING
Binder Jetting Stainless Steel 316L 35 µm 1mm ±3%, with a minimum threshold of ±0.3 mm MAX SIZE 50 mm (L) x 80 mm (W) x 40mm (H) 0.8 mm 0.5 mm 0.5 mm

AVAILABLE AT TENSILE MODULUS TENSILE STRENGTH ELONGATION AT BREAK MELTING TEMPERATURE IMPACT STRENGTH (IZOD NOTCHED) GLASS TRANSITION TEMPERATURE HDT B (0,45 MPa, DRY) DENSITY COMPOSITION
DMLS / SLM Aluminum AISi10Mg0,6 70 ± 5 GPa 410 MPa 5 ± 2% 560°C 240 MPa – – – Aluminum: >89% Silicon: 9 – 10 % Magnesium: 0.2 – 0.6 %
Titanium 6AI-4V XY: 108 ± 20 GPa Z: 112 ± 13 GPa XY: 1260 ± 40 MPa Z: 1250 ± 50 MPa XY: 7 ± 3 % Z: 9 ± 3 % 1660°C XY: 1125 ± 65 MPa Z: 1130 ± 75 MPa – – 4.41 g/cm³ Titanium: 88 – 100 % Aluminum: 5.5 – 6.5 % Vanadium: 3.5 – 4.5 %
Stainless Steel 316L XY: 220 GPa Z: 186 GPa XY: 650 ± 50 MPa Z: 540 ± 55 MPa XY: 40 ± 15 % Z: 50 ± 20 % 1400°C 550 ± 50 MPa 30 J/cm² 89 HRB 7.9 g/cm³ Iron: 66- 70% Chrome: 16-18% Nickel: 11- 14% Molybdenum: 2- 3%

AVAILABLE AT TENSILE MODULUS TENSILE STRENGTH ELONGATION AT BREAK MELTING TEMPERATURE IMPACT STRENGTH (IZOD NOTCHED) GLASS TRANSITION TEMPERATURE HDT B (0,45 MPa, DRY) DENSITY COMPOSITION
Wax Casting Bronze – – – 1450°C – – – – Copper: 90% Tin: 10%
Brass – – – 1450°C – – – – Chopper: 80% Zinc: 15% Tin: 5%
Sterling Silver – – – 951°C – – – – Silver: 93% Copper: 4% Zinc: 3%

AVAILABLE AT TENSILE MODULUS TENSILE STRENGTH ELONGATION AT BREAK MELTING TEMPERATURE IMPACT STRENGTH (IZOD NOTCHED) GLASS TRANSITION TEMPERATURE HDT B (0,45 MPa, DRY) DENSITY COMPOSITION
Binder Jetting Stainless Steel 316L 179 ± 18 GPa 506 ± 7 MPa 63 ± 3% – – – – 7.7 g/cm³ Fe balance, Cr 16–18%, Ni 10–14%, Mo 2–3%, Mn ≤2%, Si ≤1%, C ≤0.03%, N ≤0.1%

Laserschneiden

Designrichtlinien

Laser cutting guidelines
Klicken Sie hier zum Herunterladen

Technische Spezifikationen

Laser Cutting material comparison - Technical specifications
Klicken Sie hier zum Herunterladen

Sind Sie bereit, Ihr 3D-Modell zu realisieren?

Laden Sie Ihre 3D-Datei hoch, wählen Sie die Materialien und Veredelungsoptionen aus und überlassen Sie den Rest unserem professionellen 3D-Druckservice. Ihre Teile werden innerhalb weniger Tage an Ihre Haustür geliefert. Holen Sie sich noch heute Ihre 3D-Druckteile.

Datei hochladen